English
Home > Products> Wear-resistant HDPE Board

Wear-resistant HDPE Board Manufacturers

Kaxite is a leading China Wear-resistant HDPE Board manufacturer, supplier and exporter. Adhering to the pursuit of perfect quality of products, so that our Wear-resistant HDPE Board have been satisfied by many customers. Extreme design, quality raw materials, high performance and competitive price are what every customer wants, and that's also what we can offer you. Of course, also essential is our perfect after-sales service. If you are interested in our Wear-resistant HDPE Board services, you can consult us now, we will reply to you in time!

Related Products

Hot Products

  • RX Ring Joint Gasket

    RX Ring Joint Gasket

    > Ring Joint Gaskets are for oilfield and process industry duties. > RX Ring Joint Gasketare designed for pressures up to 15,000 PSI. > RX types of gaskets are more costly then Oval and Octagonal rings. > RX type gaskets perform excellent in API 6B flanged.
  • EPDM Rubber O Ring

    EPDM Rubber O Ring

    The following is the introduction of high quality EPDM Rubber O Ring, hoping to help you better understand EPDM Rubber O Ring. Welcome new and old customers to continue to cooperate with us to create a better future!
  • Inner Outer Ring Of SWG

    Inner Outer Ring Of SWG

    We Inner Outer Ring Of SWG make different inner and outer rings small than 14 inch.Large sizes also can be.
  • Neoprene Rubber O Rings

    Neoprene Rubber O Rings

    Neoprene Rubber O Rings provides good resistence to UV, oxygen and weather applications. Neoprene o rings are commonly used in the refrigeration industry due to excellent resistance to ammonia and freon. Neoprene o-rings offer a range of operating temperatures
  • High Quality Circular Cutter

    High Quality Circular Cutter

    As the professional manufacture, we would like to provide you High Quality Circular Cutter. And we will offer you the best after-sale service and timely delivery.
  • Graphite Sheet with Metal Mesh

    Graphite Sheet with Metal Mesh

    Graphite Sheet with Metal Mesh with metal mesh is made of expanded flexible graphite Kaxite B201, reinforced by a metal mesh of SS304 or SS316 or CS, graphite content of more than 98%, the density is 1.0g/cm
  • Related Blog
  • Reviews

  • Gasket Improvements

    A common improvement is an inner compression ring. A compression ring allows for higher flange compression while preventing gasket failure. The effects of a compression ring are minimal and generally are just used when the standard design experiences a high rate of failure.

  • The Various Types Of Flange Insulation Gasket Kits

    Type F gaskets are designed to fit the raised face portion of flanges. The outside diameter of the gasket is slightly smaller than the inside diameter of the bolt hole circle.

  • What are the performance advantages of PTFE gaskets?

    High temperature resistance of PTFE gasket: the operating temperature can reach 260℃, low temperature resistance: it has excellent mechanical toughness, the lowest temperature can reach -196℃, the working pressure can reach ≤4.0Mpa, and the elongation rate can reach 5% , It can also resist corrosion to most chemicals and solvents, showing laziness, strong acid and alkali resistance, water and various organic solvents.

  • Spiral Wound Gasket Identification

    Spiral wound gaskets at times can seem to be very confusing with so many colours and stripes on them. However, it should be noted that using the ASME designation colour chart is pretty straight forward.

  • What is mica board?

    The mica board is made by bonding, heating and pressing mica paper and organic silica gel water, in which the mica content is about 90% and the organic silica gel water content is 10%. Excellent flexural strength and processing performance, the product has high flexural strength and excellent toughness, and can be processed into various shapes without delamination by punching. Excellent environmental protection performance, the product does not contain asbestos, and produces less smoke and odor when heated, even smokeless and tasteless.

  • Characteristics of Gaskets

    Gaskets are normally made from a flat material, a sheet such as paper, rubber, silicone, metal, cork, felt, neoprene, nitrile rubber, fiberglass, polytetrafluoroethylene (otherwise known as PTFE or Teflon) or a plastic polymer (such as polychlorotrifluoroethylene).

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept