Products
- Gaskets
- Spiral Wound Gaskets
- Expanded Graphite Gaskets
- Ring Joint Gaskets
- Corrugated Gaskets
- PTFE Gaskets
- Double Jacket Gaskets
- Asbestos Rubber Gaskets
- Serrated Gaskets
- Non-asbestos Gaskets
- Gasket Tape
- Copper Gaskets
- Flange Insulation Gasket Kits
- Rubber Gaskets
- Ceramic Fiber Gaskets
- Rubber O Ring
- Rubber-steel Metal Gaskets
- Braided Packing
- Compression Sheets
- Sealing Materials
- Insulation Products
- Sealing Machines
- Sealing Tools
- Ptfe Products
Products
- View as
Nomex Fiber Packing With Rubber Core
Nomex Fiber Packing With Rubber Core The rubber core can absorb vibration to control leakage. Normally use silicone rubber core.
Read MoreSend Inquiry
Nomex Fiber Packing
Nomex Fiber Packing braided from high quality Dupont Spun nomex yarns with PTFE impregnated and lubricant additive, high cross-sectional density and structural strength, good sliding characteristic, gentle on shaft. Compared to kevlar, not hurt shaft, good idea for food industries.
Read MoreSend Inquiry
Graphite Spun Aramid Fiber Packing
Graphite Spun Aramid Fiber Packing Spun aramid packing impregnated with graphite. No harm to shaft, still wearable, good heat conduction.
Read MoreSend Inquiry
Graphite PTFE Packing with Aramid Fiber Corners
Graphite PTFE Packing with Aramid Fiber Corners This packing is a multi-yarns packing. The corners of packing are made of aramid fiber yarns impregnated with graphite PTFE, the friction faces are made of graphite PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure graphite PTFE.
Read MoreSend Inquiry
Graphite PTFE and Aramid Fiber in Zebra Braided Packing
Graphite PTFE and Aramid Fiber in Zebra Braided Packing Multi-yarns in zebra braided packing consisting of Kaxite Graphite packing yarns and aramid fiber. Compared to P308B, it has excellent lubrication ability and thermal conductivity.
Read MoreSend Inquiry
Aramid Fiber Packing
Aramid fiber packing braided from high quality Dupont aramid and kevlar fiber with PTFE impregnated and lubricant additive. It is wear resistant but may damage the shaft is not used properly. A minimum shaft hardness of 60HRC is therefore recommended.
Read MoreSend Inquiry