Products
- Gaskets
- Spiral Wound Gaskets
- Expanded Graphite Gaskets
- Ring Joint Gaskets
- Corrugated Gaskets
- PTFE Gaskets
- Double Jacket Gaskets
- Asbestos Rubber Gaskets
- Serrated Gaskets
- Non-asbestos Gaskets
- Gasket Tape
- Copper Gaskets
- Flange Insulation Gasket Kits
- Rubber Gaskets
- Ceramic Fiber Gaskets
- Rubber O Ring
- Rubber-steel Metal Gaskets
- Braided Packing
- Compression Sheets
- Sealing Materials
- Insulation Products
- Sealing Machines
- Sealing Tools
- Ptfe Products
Products
- View as
40% Bronze filled PTFE Round Bar
40% Bronze filled PTFE Round Bar is the most common metal filler and it is dark brown in color. Bronze filler has excellent wear, creep resistance, and higher thermal conductivity than glass fiber with PTFE. Adding bronze in percentages between 40 and 60% can increase wear. PTFE Bronze-filled has poor chemical resistance in the presence of acids and alkali. PTFE Bronze-Filled is machined and used in bearings at high speeds when shafts are not hardened. It is useful in applications with higher mechanical loads and higher speeds rubbing contact points where bronze-filled supplies the strength and conductivity to carry away excess and unwanted heat. Used in hydraulic systems, superb for linear bearing, slides, guide ways, bearing rings, piston rings and wear pads., etc
Read MoreSend Inquiry
25% Bronze Powder Filled PTFE Rod
25% Bronze Powder Filled PTFE Rod Bar is the most common metal filler, it is dark brown in color. Bronze filler has excellent wears, creep resistance, and higher thermal conductivity than glass fiber with PTFE
Read MoreSend Inquiry
60% Bronze filled PTFE Rod
60% Bronze filled PTFE Rod is the most common metal filler and it is dark brown in color. Bronze filler has excellent wear, creep resistance, and higher thermal conductivity that glass fiber with PTFE
Read MoreSend Inquiry
40% Bronze filled PTFE Rod
40% Bronze filled PTFE Rod is the most common metal filler and it is dark brown in color. Bronze filler has excellent wear, creep resistance, and higher thermal conductivity that glass fiber with PTFE
Read MoreSend Inquiry
Carbon Fiber Filled PTFE Rod
Carbon filled has better creep and wear resistance compared to Carbon fiber Filled PTFE Rod. These properties are improved with the addition of a carbon filler. This filler improves dimensional stability, raises the heat deflection temperature, improves creep resistance and the dynamic bearing performance
Read MoreSend Inquiry
25% glass filled PTFE Rod
We offer high quality 25% glass filled PTFE Rod to our esteemed customers. These products are ideally suited for the manufacture of corrosion-resistant gaskets and seals
Read MoreSend Inquiry